Trang nay su dung font UniCode

 

THAM KHẢO : Những thông số kỹ thuật cơ bản của Kingmax Flash Drive

 

USB Flash Disk 1.1
   
Features
Palm size & stream-line shape
No mechanical drive, well-integrated design
Data Encryption from unauthorized accessing data
Supporting USB ZIP bootable interface
Hot Plug and Play - Accessing data on the USB Flash Drive anytime
Driverless for Win ME / XP, Win2000 or Mac OS 9.0 above
On-line write protection switch alteration to avoid unintentional deletion
LED indicator for status display
Easy to use through USB interface
Supporting full-speed (12Mbps) transmission
Driver Downloand for windows 98
     
  Specification
 
 
  Size:83 X 29 X16 mm   Data transfer speed:
  Weight:20 grams   Read (Flash Drive to Host) 900 kbytes/sec
  USB V1.1 interface   Write (Host to Flash Drive) 500 kbytes/sec
  Capacity: 32 / 64 / 128 / 256 / 512MB   Conforming to FCC and CE standards
       
 
 
 
USB Flash Disk 1.1

 
Features
No Driver Necessary:
  No driver needed for Windows ME/2000/XP , Linux, and Mac OS
Cross Platform:
  You can move data among different OS by just
PLUG & PLAY in anywhere.
Easy Installation:
  Just plug it into computer and do nothing more
No External Power Supply Required:
  Via USB port , no other external power is required
Durable Solid-State Storage:
  Shock Resistant and more than 10years data retention
Driver Downloand for windows 98
     
  Specification
 
 
  USB 1.1 specifications compliance   Erase cycles: 1,000,000 times
  Acoustic noise: 0 dB (at one meter)   Shock resistance: 1000 G (maximum)
  More than 10 years data retention   Access rate: -Read speed > 750KB / sec
      -Write speed > 450KB / sec
 
  Power consumption: 29mA~36mA   Weight: 21g approximately
   
  Plug and Play
 
  When you plug the device into the USB port of your computer, you will see a "Removable Disk" icon in the file manager window.
 
  In Macintosh, once you plug the UMSD into the USB port. You can see the disk icon in the "Desktop".
  In Linux OS, you can follow the following instruction to "mount" the device,
.Execute cd /etc/sysconfig/ ( cat /etc/sysconfig/hwconf | more )
.Check the device information in hwconf,write down the mount point.
.Make a directory in /mnt (ex: mkdir /mnt/usbHD )
.Then, execute mount /dev/sda /mnt/usbHD (if mount point was .dev/sda )

  USB Flash Disk 2.0

   
Features
Palm size & stream-line shape
No mechanical drive, well-integrated design
Data Encryption from unauthorized accessing data
Supporting USB bootable interface
Hot Plug and Play - Accessing data on the USB Flash Drive anytime
Driverless for Win ME / XP / 2000, Mac OS or Linux
On-line write protection switch alteration to avoid unintentional deletion
LED indicator for status display
Easy to use through USB interface
Conforming to USB V2.0 specification
Driver Downloand for windows 98
 
 
     
  System Requirements
   

 
  System with USB interface   Pentium 166 or higher
  Windows 98/SE/ME/XP, Win2000 or Mac OS 8.6 above or Linux kernel 2.4 above   Minimum 16MB RAM
     
Specifications
 

 
  Size:83 X 29 X16 mm   Data transfer speed:
  Weight:20 grams   Read (Flash Drive to Host) 6.0 MB/sec
  USB V2.0 interface   Write (Host to Flash Drive) 5.0 MB/sec
  Capacity:32 / 64 / 128 / 256 / 512MB   Conforming to FCC and CE standards
   
Order Information
 

 
Model Name
Exposition
KFD032M-P2B
USB 2.0 Flash Drive (32MB)
KFD064M-P2B
USB 2.0 Flash Drive (64MB)
KFD128M-P2B
USB 2.0 Flash Drive (128MB)
KFD256M-P2B
USB 2.0 Flash Drive (256MB)
KFD512M-P2B
USB 2.0 Flash Drive (512MB)
     

 

TRỞ VỀ TRANG TRƯỚC | TRỞ VỀ TRANG CHỦ  |  TRỞ VỀ TRANG MỤC LỤC BÀI VIẾT


Copyright © 1999-2003 Pham Hong Phuoc Homepage